Tektronix AWG7 1B Series, Service Manual, Page: 37 / 174

Adjustment Procedures
4. The AwgService UI window appears. (See Figure 3-1.)
Figure 3-1: AwgService UI window
The left half of the window with the title Calibration is the calibration part of the
window. You can perform the calibrations either all in one step or individually.
However, since the calibration sequence is prede
fi ned, follow the sequence from
the top. You must fi nish a calibration item listed on the upper part of the screen
before performing the lower part of the items. Some items may be grayed out,
depending on your instrument option con
fi gurations.
The Data Timing-Magic button is always grayed out because it can be used only
in Factory Mode.
AWG7000B and AWG7000C Series Service Manual 3–3