Characteristic
A SAWTOOTH
Source
Polarity
Output Voltage
Rate of Rise
Into 50 51
Into 1
MQ
Paral-
led by 1 50 p F
Output Resistance
B SAWTOOTH
Source
Polarity
Output Voltage
Rate of Rise
Into 50
Q
Into 1 Mll
Paralleled by 1 50
pF
Output Resistance
A GATE
Source
MAIN
DLY'D
@
TABLE 2-1 (cont.)
Electrical
Performance Requirement
SIGNAL OUTPUTS
Time-base unit in A H O R I Z Compart-
ment
50 mY/unit of time (selected by time-
base time/div switch) within 1 5%. 1 00
ns/div max"lmum
1 V lunit of time (selected by time-
base time/div switch ) within 1 0%.
1 j1s/div maximum
Time-base unit in B H O R I Z Compart-
ment
50 mY/unit of time (selected by
time-base time/div switch) within
1 5%. 1 00 ns/div maximu m
1 V funit of time (selected by time-
base time/div switch) with in 1 0%.
1 fls/div maximum
M A I N or D L Y'D gates from time-
base unit installed in the A H O R I Z
compartment
Specification-7844fR7844 Operators
Supplemental Information
Positive-going with base-line at
a v
within
1 V (into 1 MQ)
Approximately 950
Q
Positive-going with basel ine at 0 V with in
1 V (into 1
Mrl)
Approximately 950
S7,
Selected by rear-panel switch
Derived from the displayed sweep, gate is
positive-going with basel ine at 0 V within
0.1 V (into 1 Mll)
Derived from the delay gate of those time-
base units that furnish a delay gate (see plug-
i n unit specification) and is a positive !evel
with base line at 0 V within 0.1 V (into 1
M51). Output is always positive when no
plug-in is used or plug-in does not provide
a del ay gate,
2-5
