![background image](http://html1.mh-extra.com/html/tektronix/11a34/11a34_user-reference-supplement_1077447020.webp)
Probe ID
3 .
4 .
5 .
to accommodate
input signal introduced
Probe ID Utility
Autos-et is the automatic
of vertical
factor,
and sweep speed to produce a meaningful
display, e.g., two
five divisions of
deflection
and
two to five
repetitions of the input signal. For more information, refer to
in
the
and 11302 User’s
manual.
mainframe can automatically measure the selected trace. Automatic
of the selected
can
initiated by
a probe ID
The Automatic
feature
be enabled or disabled
using the Probe utility
such
are
maximum, middle, and minimum voltages; frequency, period,
width,
and duty cycle. For full information about automatic
see
Measure in the 11301
manual.
An interrupt to the
and
be generated. Pressing a probe
button
the mainframe to produce an SRQ to the
and
232-C For more information, refer to the
part of the 11301
and 11302 User’s Reference manual.
Front-Panel Error Messages
Message:
Cause:
Message:
Cause:
Internal DAC overflow on channel N of LEFT, CENTER, or RIGHT
plug-in unit, where N =
or 4.
plug-in unit detected
a requested setting overflowed an
DAC. Such overflow usually indicates defective
hardware. Jn this situation, the plug-in unit
the DAC to the
limit nearer the
on
N of LEFT,
or
RIGHT plug-in unit, where N =
or4.
plug-in unit
that a
2 TEKPROBE had failed
or
improperly
the
11301 and 11302 Mainframes