Other Functions
the 11301
their operation is described in detail in Section 2,
of the
informationabout
Functions And Where They
Function
Under Heading
Waveform Acquisition:
Menu;
or for X-Y Display: Horizontal Menu.
Waveform Acquisition:
Menu.
Acquisition: Waveform Menu.
Selection
Trigger Source Major Menu and
Position and Offset
The
and
position control to the Left
Control
knob by
the VERTICAL
button. The Vertical Position control
moves the trace as a user convenience. For example, when displaying multiple
channels it may be desirable to set ground references for each trace on separate
Position is a screen-related function; its units are divisions.
The offset function,
by pressing the VERTICAL OFFSET button,
subtracts a
voltage from the ‘input signal. Changing offset
the
just
does the position
control.
However, if the deflection factor is
subsequently changed, the effect
different
Changing the
increase
the
of
display
around some
level
two divisions above
center) set by the
Position control.
using a
the displayed waveform
the screen,
control
to
waveform area of
interest to the screen location established by the Position control.
The Position control has a range of plus and minus four divisions from
center, but the
has a range
in volts.
can be as much
as
divisions at 1
The Offset control range is
one
volt for all
from 1
to 995
but
to 10 volts for
sensitivities from
to
For
from volt to
Offset
range
to
volts.
2 - 2