![background image](http://html.mh-extra.com/html/tektronix/114/114_instruction-manual_1078724044.webp)
TEST CONDITIONS
All Voltage Readings
were obtained
under the following conditions
unless
otherwise
noted on
the specific
diagrams:
Line
Voltage
Dc
Voltmeter Impedance
117 volts
20,000
Ω/volt
Control Settings:
All VARIABLE controls
PERIOD
WIDTH
AMPLITUDE
TRIGGER switch
counterclockwise
(CAL)
100 µS
10
µS
+
3
to 10V
LEADING
EDGE
Voltage readings shown in
blue on the schematics were obtained
with a 20,000 Ω/volt meter and in some cases show meter loading.
All voltages measured with respect to the outside shell of C283 unless
otherwise (*)
indicated.
Voltage readings may vary somewhat between instruments due
to
normal manufacturing tolerances
and component characteristics.
Waveforms shown on the schematics were
obtained from the crt
of
a Tektronix Type 547/1A1 Oscilloscope.
Summary of Contents for 114
