ORR24 Instruction Manual
7
Operating Basics
Figure 1 shows the front panel of the ORR24 Optical Reference Receiver. The
ORR24 Optical Reference Receiver has an FC/PC receptacle for optical signal
input and a precision 3.5 mm connector for electrical signal output.
Handling
Handle the ORR24 Optical Reference Receiver carefully at all times.
CAUTION.
To avoid damaging the ORR24 Optical Reference Receiver, take the
following precautions:
Do not drop the Optical Reference Receiver since damage and misalignment of
the photodiode optical assembly can result. Store the Optical Reference Receiver
in a secure location when not in use.
Replace the protective caps on the input and output connectors when the Optical
Reference Receiver is not in use.
Cleaning Optical Connectors
Small dust particles and oils can easily contaminate optical connectors and
reduce or block the signal. Take care to preserve the integrity your connectors by
keeping them free of contamination.
CAUTION.
To prevent loss of optical power or damage to the optical connectors,
keep the connectors clean at all times.
When cleaning the connectors with a swab, use gentle circular motions. Use only
high quality cleaning supplies that are non-abrasive and leave no residue.
To reduce the need for cleaning, immediately replace protective caps on the
optical connectors when not in use.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
