Technology Solutions
Instruction Manual
Tek-Clamp 1200A-100H
www.tek-trol.com
19
frequency signal output
upper limit of alarm, confirm
a range. When actual flow is
over the range set in this
window, then it creates an
alarm signal output that is
transferred to outside by
setup OCT or relay.
M74
Setup upper limit flow of
frequency signal output
M75
LCD backlit control
M76
LCD contrast ratio control
M77
Beeper setup options
M78
Setup Open Collector Transistor output (OCT) output options
M79
Setup relay (OCT2) output options
M80
Choose input signal of batch controller
M81
Batch controller
Heat
quantity
measuring
M82
Day/month/year totalizer, check the flow rate and heat
quantity of the totalizers
M83
。
Automatically replenish flow switch during the period of
power off, default status: off this function is not available
under special conditions.
M84
Choosing heat quantity unit,
1. GJ(default)
2. KCal
3. KW
4. BTU (imperial unit)
M85
Choose temperature signal origin, if choosing inputting
temperature signal by AI3, AI4, then need temperature
transmitter that can output 4-20mA current signal.
M86
Heat capacity, default: GB-CJ128 enthalpy potential method.
Temperature difference method is available also.
M87
Heat quantity totalizer switch
M88
Heat quantity multiplier factor.
M89
Display present temperature difference and setup temperature
difference sensitivity.
M8•
Options of installation of heat meter on supply water pipe or
return water pipe
Diagnosis
M90
Display the signal strength and signal quality
M91
Display the transit time ratio
M92
Display the calculated fluid sound velocity.
M93
Display the total transit time and the delta time
M94
Display the Reynolds number and the pipe coefficient
M95
Display positive, negative heat quantity totalizer, start cycle
display function.
Added
menu
windows
+0
Display the time of power on/off and flow rate
+1
Display the total working time of the flow meter
+2
Display the last time of power off.
