Technology Solutions
Instruction Manual
Tek-Clamp 1200A-100H
www.tek-trol.com
18
flow directly to the thermal printer hanged inside bus. Setup
printing data output to outside serial port (RS485 port)
AI5 setup
M53
Display analogue input AI5(reserved for the Tek-Clamp 1200A
mainboard)
Input and
output
setup
M54
Setup of OCT totalizer pulse output, pulse width, range:6 Ms-
1000Ms.
M55
Choose current loop mode
M56
Corresponding data to output of current loop 4mA or 0mA
M57
Corresponding data to output of current loop 20mA
M58
Verification of current loop output applied to check whether
current loop is normal or not.
M59
Present output of current loop
M60
Date time and setup of the date time of the new is realized by
CPU, when upgrading software, time will be slow. So after
upgrading, recommended to adjust the date and time to
display correctly
M61
Software version information and Electronic Serial Number
(ESN)
M62
Setup serial port parameter
M63
Communication protocol choosing (including compatible
protocol choosing), two options, choosing MODBUS-RTU
means using binary system MODUS-RTU protocol. Choosing
MODBUS-ASCII+previous protocol means using ASCII protocol,
at this time can support several protocols simultaneously,
including MOSBUS-ASCII, previous 7 version protocol, FUJI
protocol, Meter-BUSx protocol etc.
M64
Analogue input AI3
By inputting the measuring range, the
flow meter will turn current signal into
data range users need
M65
Analogue input AI4
M66
Analogue input AI5
M67
Setup frequency range of frequency output signal. Frequency
signal output represents instant flow rate value by signal
frequency value. Default: 0-1000Hz, Max-range:0-999Hz.
Output frequency signal by special frequency output unit.
Input and
output
setup
M68
Setup lower limit flow of frequency signal output
M69
Setup upper limit flow of frequency signal output
M70
LCD backlit control
M71
LCD contrast ratio control
M72
Work timer, logging work time of the flow meter by unit of
second.it can reset.
M73
Setup lower limit flow of
By adjusting the lower and
