Display will then show “
PSd-n
” (no), press “
+
” to change it to “
PSd-y
” (yes) to turn the security passcode on. Press “ ” to confirm.
Then, choose a 4-digit passcode of your preference.
Press “
+
” and “
-
” to adjust numbers up/down.
Press “ ” to confirm.
Hold “ ” for two seconds to return to the “
PSd-y
” screen.
Hold “ ” again for two seconds to return to the “PS” screen.
Hold “ ” one last time to return to the main screen.
Now, when powering the e-bike on, the bike will prompt you for the passcode you set above.
Press “
+
” and “
-
” to adjust numbers up/down.
Press “ ” to confirm.
If the passcode was entered correctly, the e-bike will power on and display the main screen.
•
•
•
•
NOTICE:
if the e-bike is reset to factory defaults as described above, the security
passcode will be lost and will need to be reentered.
30
