Parts List:
Description
Qty
Bolt, Flange, ½” x 1 ½”, Gr. 8, YD
8
Bolt, Hex, 3/8” x 1 ½”, Gr. 8, Yellow
10
Nut, Flange, Serrated, 3/8”, Gr. 8, Yellow
10
Front Bracket Supports
L&R
Loose Parts:
If Fitted with Electrical Options Only:
Description
Qty
Loop, ¼”
2
Installation Instructions:
1. Remove two-post ROPS from machine, if equipped. Save fasteners to re-use later.
2. Slide seat all the way forward.
3. Take the left front bracket support and position it under the front left corner of the operator
platform. Using the provided 3/8” x 1 ½” hex bolts and flange nuts, attach the bracket to the
platform. See photo below of bracket installed.
June 2021© Toro Reelmaster 5010 Series ROPS Installation Manual
