background image

General Safety 

1. Never let an unqualified or untrained driver operate the reel mower.
2. Keep a fire extinguisher, with ABC rating securely fastened in the ROPS. Maintain it and be
familiar with its use.
3. Do not carry passengers.
4. Never  operate  the  mower  in  a  closed  building  for  a  prolonged  period.  Ensure  adequate
ventilation is present, as engine exhaust fumes are poisonous and can kill.
5. Always keep sleeves, jackets or other loose clothing relatively tight and belted. Loose clothing
may catch on moving parts and result in severe personal injury or death.
6. Provide a first-aid kit, securely attached inside of the ROPS for use in case of accident.
7. Never jump from the mower. There is a danger of tripping or falling on protruding parts.
8. Use  steps  and  hand  holds  when  mounting  and  dismounting  the  mower,  or  for  servicing
components too high to reach from the ground.
9. When seated in the ROPS, fasten seat belt before starting the engine. A proper seat belt must
be worn at all times when using a ROPS.
10. Safety devices and shields are intended to protect operators from injury or death. Under no
circumstances should they be modified, disabled or removed.

Operating Safety 

1. Always operate the mower controls while sitting in the operator’s seat.
2. Lock seat in position and buckle seat belt before operating the mower.
3. Avoid abrupt sharp turns at high speeds.
4. On sloped terrain, do not make sharp turns as machine stability could be compromised.
5. Operate the mower smoothly, avoid abrupt starts and stops.
6. Keep all shields in place when operating the mower.
7. Do not operate the mower when you are tired, sick, or impaired.
8. Never operate the mower in confined areas; visibility next to the tractor is reduced. Injury to
bystanders or damage to the ROPS or equipment may result.

Safety 

Carefully  review  the  procedures  given  in  this  manual  and  the  reel  mower  operator’s  manual 
with all operators annually. It is important that all operators become familiar with, and follow 
safety precautions. Operating instructions must be given to everyone using the tractor before 
operation  and  at  least  once  yearly  thereafter  in  compliance  with  OSHA  Regulations  1928.57 
(United States). 

    June 2021© Toro Reelmaster 5010 Series ROPS Operation Manual 

Summary of Contents for Toro Reelmaster 5010 Series




















Reviews: