Kona All-in-One Home Sensor User Guide
T0005370_UG
Version 0.5
TEKTELIC Communications Inc.
Confidential
Page 12 of 32
3.5
External Connector Cable Installation
The Kona All-in-One Home Sensor with External Connect installation requires connection to the
external device. The external device cable attaches to the 2-pin connector located on the top of
the Home Sensor.
Figure 3: Kona All-in-One Home Sensor External Connector Signals
Figure 3: Kona All-in-One Home Sensor External Connector shows the external connector signal
locations. The connector is designed to be attached to an open-drain output, however the
signal line can also be driven with digital signals at 1.8V logic levels. Connection cable length
should NOT exceed 3 meters. Do not connect to an outdoor device.
Signal
Connection
Ground
Connection
Summary of Contents for Kona All-in-One Home Sensor Series
Page 31: ......