TEKTELIC Communications BLE ASSET TRACKER, User Manual

Page: 14 / 21

BLE Asset Tracker User Guide T0005946_UG Version 1.1
TEKTELIC Communications Inc. Confidential Page 14 of 21
Figure 2-2: Threading Zip Ties Through the Mounting Holes to Fasten the Tracker.
2.6 Battery Replacement
The process for replacing the battery in the Tracker is as follows.
1. Insert the end of a paper clip or similarly thin object into the case-release hole on the right
side of the Tracker. Push the paper clip straight in while simultaneously squeezing the
middles of the sides of the top portion of the enclosure as shown in
Figure 2-3 . The top
and bottom should unclip from each other and separate.
Figure 2-3: Opening the BLE Tracker Enclosure.
1
2