Tekon PA202320510, Installation Manual

Page: 21 / 39

03
step
TWP-xDI TRANSMITTER DIGITAL INPUTS CONFIGURATION
21
INSTALLATION GUIDE PLUS TWP-XDI
NOTE:
By default, digital inputs are configured as No Trigger.
Each digital input can be configured, as No Trigger, Raising Edge, Falling Edge, Both ou Counter.
01
To enter in Configuration Mode follow steps 01 to 05 of TWP-xDI PLUS Wireless Transmitter Configuration
.
02
In Tekon Configurator Software select PLUS >> Transmitter >> Digital Inputs menu.
2
1
3
03
To use the digital input for state detection, select No Trigger, Raising Edge, Falling Edge or Both option and click
Write . To use the digital input as a pulse counter, select Counter option and click Write .
As an example, select Both option on Digital Input 1 and click Write .
If you are configuring PLUS TWP-2DI ,
reproduce configuration steps to the
second digital input.