Tekon PA202320510, Installation Manual

Page: 19 / 39

02
step
TWP-xDI PLUS WIRELESS TRANSMITTER CONFIGURATION
19
INSTALLATION GUIDE PLUS TWP-XDI
NOTE:
Make sure that the devices are at a distance of at least 3 meters or remove the antenna from the gateway (in
case both devices are near each other).
After clicking on Disconnect button, the device will permanently attempt to connect to a wireless network.
If there is no communication, the Status LED flashes slowly and the Mode LED flashes quickly.
When there’s a successful connection directly to a wireless network, both status LEDs alternate quickly - during
1 minute if the transmitter is operating as end device or permanently if operating as repeater.