03
step
CHECK WIRELESS COMMUNICATION BETWEEN THE DUOS TRANSMITTER AND THE GATEWAY
DUOS WIRELESS SYSTEM
INSTALLATION GUIDE
17
01
02
Place the two windows of Tekon Configurator software devices’ side by side, in order to analyse communication
between both devices.
Select the configured
Transmitter ID
in the
Gateway
window. After this, it is possible to access the address
window of the
Transmitter
in analysis.
The communication between devices is successfull when the
Communication Period
field is in compliance with
its duration cycle. Therefore, as soon as the cycle duration has finished, it will turn back to 0.
Communication does not occur if the
Communication Period
field presents a higher value than the
Elapsed Time
field.
In the following example, it was established that the temperature monitoring cycle (or
Elapsed Time
) is 2 seconds.
Therefore, the
Communication Period
field will turn back to 0 as soon as it reaches 2 seconds and the analysed
parameters (in this case, the temperature) will be updated in accordance with ambient conditions.
You can define the communication period of the
Transmitter
(or the
Elapsed Time
) in the write field by clicking on
the
register
( ) button.
