DUOS UTEMP WIRELESS TRANSMITTER
INSTALLATION GUIDE
04
step
CONNECT AND CONFIGURE DUOS WIRELESS REPEATER
24
Click on the
Configuration Mode
( ) button to exit the setup programme.
NOTE:
In order to establish communication between the Repeater and the Gateway, make sure that both devices are at a
distance of at least 3 meters or remove the antenna from the repeater (in case both devices are near each other).
These procedures will guarantee communication quality.
At this moment, it is possible to check if:
•
The
Repeater
is trying to connect to the network when the red LED flashes every second.
LED flashes slowly
Red LED flashes until
communication can be
established
10
