3
INSTALLATION AND MAINTENANCE MANUAL FOR THE EMERGENCY
LUMINAIRE TYPES TWT17XX(W)(K)
Product Description
Luminaire is
maintained emergency light,
which is equipped with pictogram illuminated from
within.
Usage targets
:
Facilities, cruise ships and other locations where emergency lighting is
required.
Points to note
Installation of this product must be done only by a qualified electrician
Only original spare parts may be used for this product. Any modifications to this product are
prohibited without manufacturer’s written permission. This product may only be used for
manufacturer’s specified use.
Technical Data
- insulation class: 2 (types that end to letter –S which are double insulated)
- insulation class: 1
- casing: IP44
- applied European Directives and standards: 89/336EEC, 92/31/EEC EMC-directive,
73/23/EEC, 93/68/EEC LVD-directive, EN 55015, EN 61547, EN 60598-2-22, EN 60598-1,
EN1838
LVD-directive only for the types with 230V supply voltage.
-Type code ending to -K: The type is compatible with the Teknoware central battery unit with
automatic addressable testing. It can also be used with the Teknoware Local Controller unit.
TWT1771W(S)- supply voltage: 24-230 V AC/DC (Note! Luminaire shall be connected to 24V-230V AC/DC
emergency lighting central battery unit)
- light source: 3W white LED
TWT1751WK(S)- supply voltage: 230 V AC/DC (Note! Luminaire shall be connected to 230V AC/DC
emergency lighting central battery unit)
- light source: 3W white LED
TWT1752W(S)- supply voltage: 230 V AC (normal mains supply)
- self-contained luminaire with 1h battery mode duration
- light source: 3W white LED
Electrical and mechanical installation
Remove the diffuser by pulling it down.
Take the supply cables in the casing. Connect the cables to the connector, which is fitted to
the intermediate plate. The supply cable can be chained at the connector. (max 2 x
3x2,5mm2). Finally, fit the diffuser to the casing. The luminaire must not be covered by
thermally insulating material.
In case of luminaries with own battery the date of installation shall be marked to the sticker on
battery. Finally attach the sticker that indicates the classification of luminaire to the outer
surface of luminaire by following instructions attached.
