Teknor Industrial Computers TEK-CPCI 1003, Technical Reference Manual

Page: 89 / 122

A-1
A. BOARD SPECIFICATIONS
TEK-CPCI-1003 DESCRIPTION
Overview Intel Mobile Pentium
®
II based CompactPCI System Board
Supported
Microprocessors Intel Mobile Pentium
®
II 233MHz, 266MHz and
300MHz
Bus Interface CompactPCI bus, 32-bit (33MHz) through J1 and J2
PCI Mezzanine (PMC)
Proprietary Mezzanine with PCI bus, FD and EIDE interfaces
SMBus (for power management, DRAM control)
Data Path: 64-bit on CPU and video memory; 32-bit on local PCI and CPCI
PCI-to-PCI Bridge
Supports up to 7 REQ/GNT arbitration signal pair for fully loaded
CompactPCI system
System Memory
Cache Memory
Boot Block Flash
From 8MB to 384MB (SDRAM) or 768MB using Registered SDRAM
(RSDRAM), supported by three 168-pin DIMM sockets
Level 1: 16/16KB instruction
Level 2: 512KB internal, 64-bit wide, pipelined burst
256KB
I/Os USB Two Universal Serial Bus (USB) ports
Serial Four UART serial port configurable as COM1-4. COM3 is
configurable as RS-232, RS-422, RS-485, Infrared
Parallel One bi-directional multimode port with all IEEE1284 protocols
supported (compatibility, nibble, byte, EPP and ECP)
Hard Disk Two channel Bus Master PCI Enhanced IDE interfaces for
up to four Type 4 devices in Master/Slave configuration; LBA,
PIO Mode 0-4 and Ultra DMA/33
CompactFlash disk : optional bootable Compact-Flash module interfaces to
primary EIDE channel, user upgradable, Master/Slave
Ethernet Two PCI 10/100 MB interfaces (10Base-T, 100Base-TX)
SCSI 16-bit Ultra Wide SCSI (40MB/s), 8-bit Ultra SCSI (20MB/s),
8-bit Fast SCSI 2 (10MB/s)
Floppy Supports for two disk drives from 360KB to 2.88MB
Keyboard Standard AT keyboard via mezzanine board
Mouse PS/2 mouse via mezzanine board