Every time the user connects to the device, the “General” page (Figure No 1) is loaded,
which provides a general overview of the device.
5.1.2 - IF SETTING
After the signal inputs are made to our device, the broadcasts in the signal band will come
as a table. DVB-S/S2 should be selected in the Tuner section.
In the Input Setting section, adjustments are made according to the request, and the
channels in the table are uploaded to the tuner as CH-1 CH-2 CH-3 CH-4 with a maximum
90% occupancy.
LCN section is the section where we set the order of the selected channels. Selected
channels are ordered according to the request.
FOR THIS SETTING TO APPLY, THE SOURCE DEVICE MUST BE FULLY AUTOMATIC SEARCH.
The occupancy in the settings made with Set The Table is visible, if appropriate, by clicking
Set The Tuner.
Channels are uploaded to our TQM-8000 device.
