Introduction
Additional equipment and parts needed:
2/3 channel surface radio transmitter and receiver
High torque steering and brake servo
RX battery, switch harness
.21 nitro engine, tuned pipe, manifold, and glow plug
Fuel bottle, fuel, 1/8th scale starter box, and glow ignitor
1/8th scale truggy tires, wheels & CA glue
Paint for body
Tools needed:
Hex drivers (1.5mm, 2.0mm, 2.5mm)
Nut drivers (5.0mm, 5.5mm, 7.0mm)
Hobby knife
Needle-nose pliers, screwdrivers
4mm & 5mm turnbuckle wrench
4mm arm reamer
Lexan body scissors & reamer
Disclaimer:
Tekno RC is not responsible or liable for any property or personal damage, loss,
or injury incurred as a result of using this product. This kit is meant for use by persons 14
years of age or older and in the strict confines of a legally permitted RC track or facility.
Warnings:
Always double-check that your radio gear is working properly before operating vehicle.
Never operate the vehicle indoors (unless the RC track is an indoor facility). Use caution
while operating vehicle so as not to collide with people who may be turn mashalling or
who might otherwise not be aware that a fast moving RC vehicle is in the vicinity.
Warranty:
We warrant that the parts included in this kit are free from defects. If you find a defective
part in your kit, please contact us at [email protected] and we will help you to resolve the
issue. We do not warranty parts that may be broken during operation of the vehicle or
otherwise. Refer to the end of this instruction manual for a listing of spare/replacement
and option parts. All spare parts and other info are available on our website
(www.teknorc.com)
and through our network of domestic and international dealers and distributors.
Thank you for purchasing the Tekno RC NT48 1/8th 4WD Nitro Competition Truggy. The NT48
represents the state-of-the-art in 1/8th nitro truggy technology. We hope you have as much fun
driving your new vehicle as we did developing it. We are always working on new projects, so please
check our website (www.teknorc.com) regularly for the latest news, parts, and kits. Thanks again.
