Tekno RC ET410, Building Instructions

Page: 12 / 32

TKR1601
TKR6565
Bag H
Front CVA / Spindle &
Carrier Assembly
TKR1400
Step
H-1
Step
H-2
Step
H-3
Step
H-4
Step
H-5
TKR6856
TKR6856
TKR6270R
TKR6553
TKRBB10154
TKRBB06124
TKR5571M
TKR1609
TKR1229
TKR6596
TKR6596
TKR7272
TKR6856
TKR6552
TKR1601
Grease
Note: This screw
only needs to be
snug. Do not
over-tighten.
Repeat for
both sides
Note: These screws
only need to be
snug. Do not
over-tighten.
Note:
These screws
only need to be
snug. Do not
over-tighten.
Note:
These screws only
need to be snug.
Do not over-tighten.
TKRBB10154
Ball Bearing (10x15x4)
x2
x6
TKR1601
M3x4mm Set Screw
TKR1609
M3x3mm Set Screw
x2
TKRBB06124
Ball Bearing (6x12x4)
x2
TKR1400
M3x4mm Button Head Screw
x4
DO NOT SKIP
THIS STEP!
Note: These are steering
stop screws. They provide
a mechanical limit to the
steering throw and make
the car easier to drive
by greatly improving the
consistency of the steering.
TKR1221
TKR1400
Thread
Lock
TKR1229
6x10x0.2mm Shim
x2
TKR1221
M3x8mm Washer
x12
*TKR5571A
*TKR5571
*TKR1654X (+1mm)
*TKR1654 (+1mm)
(Option)
TKR6210
TKR1221
X 4pcs
TKR1201
TKR1201
TKR6208
TKR1221 x 4pcs
TKR6210
TKR6208
TKR1601
Note: This screw
is included to
keep the hole
from deforming.
Install before
TKR6208.
TKR1601
Note: This screw is
included to keep the
hole from deforming.
Install before TKR6208.
TKR6208
M3x8mm Ball Stud
x2
TKR1201
M3 Lock Nut Black
x2
TKR6210
M3x10mm Ball Stud
x2
12