Introduction
Additional equipment and parts needed:
•
2 Channel radio and receiver
•
1/10th scale ESC
•
Motors: 540 size 6.5-8.5 turn
OR
540 size 4-pole 4000-4600kv
(550 size motors not recommended)
•
Standard size high torque steering servo (at least 200 oz/in)
* Running less than the recommended rating will increase the chance of premature servo failure.
•
2S (2 cell, 7.4v) shorty LiPo battery, 5000 mAh or higher recommended
•
Paint for body and CA Glue for wheels/tires
•
1/10th scale Associated offset
(Losi offset is NOT COMPATIBLE)
stadium truck wheels & tires
OR
Traxxas Slash SC offset (front or rear) wheels & tires.
•
32 pitch pinion 12 tooth - 25 tooth (see gearing recommendations on page 20 or 26 for more guidance)
Tools needed:
•
Hex drivers 1.5mm, 2.0mm, 2.5mm
•
Nut drivers 5.5mm (TKR1108), 7.0mm (TKR1109)
•
Hobby knife
•
Needle-nose pliers
•
Shock tool (TKR1115) OR adjustable (Crescent) wrench (for shock assembly)
•
4mm turnbuckle wrench (TKR1103) AND 5.5/7.0 two sided wrench (TKR1119)
•
Body reamer
Disclaimer:
Tekno RC is not responsible or liable for any property or personal damage, loss, or injury incurred as a
result of using this product. This kit is meant for use by persons 14 years of age or older and in the strict confines of
a legally permitted RC track or facility.
Warnings:
Always double-check that your radio gear is working properly before operating vehicle. Never operate the
vehicle indoors (unless the RC track is an indoor facility). Use caution while operating vehicle so as not to collide with
people who may be turn marshalling or who might otherwise not be aware that a fast moving RC vehicle is in the vicinity.
Warranty:
We warrant that the parts included in this kit are free from defects. If you find a defective part in your kit,
please contact us @ [email protected] and we will help you to resolve the issue. We do not warranty parts that may be
broken during operation of the vehicle or otherwise. Refer to the end of this instruction manual for a listing of
spare/replacement and option parts. All spare parts and other info are available on our website (www.teknorc.com)
and through our network of domestic and international dealers and distributors.
Thank you for purchasing the Tekno RC ET410.2 1/10th Scale 4WD Competition Electric Truggy kit.
We are always working on new projects, so please check our website regularly at
www.teknorc.com
or visit us on Facebook at
www.facebook.com/teknorc
for all the latest news, parts, and kits.
Take your time! When you work your way through these building instructions, keep an eye out
for the following important indicators below:
•
RED TEXT
-
This indicates important areas of the build process that should be observed.
•
YOUTUBE
-
We also have many useful build videos on Youtube, so be sure to check these out!
https://www.youtube.com/c/teknorc
Thread Lock icons
Thread lock is always used when a screw is inserted into any metal part. (Included with kit)
Thread
Lock
Grease icons
Grease is usually used on areas with movement and for sealing. (Included with kit)
Grease
