5
UNPACKING YOUR REFRIGERATOR-FREEZER
WARNING: Use two or more people to move refrigerator-freezer.
Failure
to do so can result in back or other injury.
Remove tape and any labels from your refrigerator-freezer before using
(except the rating label).
To remove any remaining tape or glue, rub the area briskly with your thumb.
Tape or glue residue can also be easily removed by rubbing a small amount
of liquid dish soap over the adhesive with your fingers. Wipe with warm water
and dry.
Do not use sharp instruments, rubbing alcohol, flammable fluids, or
abrasive cleaners to remove tape or glue. These products can damage the
surface of your refrigerator-freezer.
When moving the refrigerator-freezer, do not tilt the refrigerator-freezer
beyond 45°from upright position.
CLEANING BEFORE USE
：
After you remove all of the packaging materials,
（
especially the foam
between outside condenser and cabinet should be removed
）
clean the
inside of your refrigerator-freezer before using it.
Failure to do so can result in death, explosion, fine or burns.
To ensure proper ventilation for your refrigerator-freezer, allow for 200mm
space on each side between walls, 200mm space between back
of your refrigerator-freezer and the wall, and 300mm space between counter
top and the roof or ceiling.