5/26-34 Dunning Ave, Rosebery NSW 2018 | 1300 313 780 | +info@tekniklighting.com.au
www.tekniklighting.com.au
INSTALLATION
DISCLAIMERS
1.
This product must be installed and used as per these instructions.
2.
This product contains no serviceable parts and no attempt should be made to repair this
product. If the product has a fault, it should be returned to Teknik or the point of sale.
3.
Electrical installations periodically receive transient over voltages. This product has been
designed to minimise the effect of such voltages on connected equipment. It may not give full
protection for extreme over-voltage transients such as those resulting from a close lighting strike.
4.
This product has been designed to operate in ambient temperatures: -20
°
C to +40
°
C.
5.
Teknik reserves the right to modify the specification of this product at any time.
Disconnect power to circuit.
Check that the base plate is securely
fitted to the wall and the “UP” arrow is
orientated correctly.
According to the mounting hole location, drill the wall and screw the
base plate onto the wall using suitable plastic wall plugs and screws.
Connect the power source to the
“L” ,“N” and Earth according to the
wiring diagram.
Fit the head unit to the base plate ensuring that the three Quick-Connect pins and mounting legs are lined
up. Re-fit the head unit screws.
Caution: Do not over tighten head unit screws.
1
2
3
4
5