INTRODUCTION
Thank you for selecting the [FLEXI] LED SPOTLIGHT. Please ensure that the luminaire is installed in
accordance with the below instructions. TEKNIK assumes no responsibility for inappropriate use or
installation of the product, including any associated damage caused.
1.
Read the entire manual carefully prior to
installation and operation.
2.
The warranty period is listed on the product
as well as on the packaging. Teknik will
repair or replace the product if it becomes
defective under normal use due to a
manufacturing defect within the prescribed
period.
3.
Declared lumen output is based upon
measurements obtained during operation
on the appointed LED electronic driver
under standardised laboratory conditions.
4.
Installation must be performed by a licenced
and qualified electrician, in accordance with
these instructions and relevant Australian
Standards.
5.
Instant restart is allowed.
PRECAUTION
6.
Do not change or tamper with any internal
electric circuits, add any wires, connectors
or cables for any reason.
7.
Please do not insert any physical objects of
any nature into the fitting as this may cause
electric shock, malfunction or damage to
the products.
8.
Before replacement of the fitting turn the
power off and allow to cool down.
9.
In case of weight discrepancy when
replacing old lamps, please ensure that the
mounted structure is rated to withstand
the weight of the new lamp and installation
materials.
10.
For further information, please contact
Teknik (www.tekniklighting.com.au) or your
local distributor.
