background image

Step 20

Page 24

 

å

Apply the WARNING LABEL (18) to the TOP (E). You should be able to read the label when the TV is removed from the
unit. When the TV is in place, it should hide the label. Peel off  the backing and apply the label as shown in the diagram.

 

å

NOTE: This is a permanent label intended to last for the life of the product. Once applied, do not try to remove it.

 

å

NOTE: Please read the back pages of the instruction booklet for important safety information.

 

å

This completes assembly. Clean with your favorite furniture polish or a damp cloth. Wipe dry.

50 lbs.

30 lbs.

40 lbs.

15 lbs.

E

WARNING

Never use this furniture with a TV 
that is too large or too heavy. Severe 
injury or death can occur. The TV and 
furniture will be unstable and may tip.

-The TV 

must 

weigh less than 

50 lbs.

-The base of the TV 

must

 be able to 

sit completely on this shelf.

Refer to instruction book for 
complete safety information. 

Note: This is a permanent label.  Do 
not try to remove. Surface will be 
damaged. 

08/05       2 6 9 2 2 0          269220

18

Summary of Contents for Canal Heights 5419232


























Reviews: