Step
å
Carefully fl ip the SMALL RIGHT END (C) over.
å
Fasten one EXTENSION RAIL (1) to the SMALL RIGHT END (C).
Use three BLACK 1/2" PAN HEAD SCREWS (22).
å
NOTE: For each EXTENSION RAIL, turn a SCREW into the hole
shown in the enlarged diagram. Then, slide the inner cartridge of
the EXTENSION RAIL in to fi nd the other hole that lines up with
the hole in the END. Turn a SCREW into this hole.
Step 18
Page 22
C
1
Open end
Use these holes.
The CAM SCREWS
should be here.
BLACK 1/2" PAN HEAD SCREW
(3 used in this step)
22
1
Open end
