Step
Step 17
Page 21
C
D
å
Separate the EXTENSION SLIDES (2) from the EXTENSION RAILS (1) as shown in the upper diagram below. Be
prepared, the parts are greasy.
å
Fasten two EXTENSION RAILS (1) to the SMALL ENDS (C and D). Use six BLACK 1/2" PAN HEAD SCREWS (22).
å
NOTE: For each EXTENSION RAIL, turn a SCREW into the hole shown in the enlarged diagram. Then, slide the inner
cartridge of the EXTENSION RAIL in to fi nd the other hole that lines up with the hole in the END. Turn a SCREW into
this hole.
å
NOTE: The EXTENSION SLIDES will be used later for the DRAWERS.
1
2
Push the black lever up and
pull the SLIDE from the RAIL.
Open end
Use these holes.
BLACK 1/2" PAN HEAD SCREW
(6 used in this step)
22
1
1
Surface with
HIDDEN CAMS
Surface with
HIDDEN CAMS
Open end
Open end
The CAM SCREWS
should be here.
