Step
Page 17
å
Carefully turn your unit over onto its front edges. Unfold the
BACK (G) and lay it over your unit.
å
Make the bottom edge of the BACK (G) even with the bottom
edge of the BOTTOM (F). Then, make equal margins along the
side edges of the BACK (G). Push on opposite corners of your
unit if needed to make it "square".
å
Fasten the BACK (G) to your unit using the NAILS (1N).
å
NOTE: Be sure to tap NAILS into the holes that line up over
the UPRIGHTS (C and D).
å
NOTE: Perforations have been provided for access through the
BACK. Carefully cut out the holes needed.
Unfi
nished sur
face
These holes must line up over
the UPRIGHTS (C and D).
G
Step 14
NAIL
(44 used in this step)
1N
These large holes must be
closer to the bottom edge.
F
