Step
å
Fasten the RIGHT END (A) to the TOP (E2) and BOTTOM (F).
Tighten four HIDDEN CAMS.
å
Fasten four ANGLE BRACKETS (27G) to the TOP (E2). Use
four BLACK 9/16" LARGE HEAD SCREWS (1S).
å
Fasten the TOP MOLDING (M) to the TOP (E2). Use four
BLACK 9/16" LARGE HEAD SCREWS (1S) through the ANGLE
BRACKETS on the TOP and into the TOP MOLDING.
å
NOTE: There are no pre-drilled holes in the TOP MOLDING.
The SCREWS will tighten into the groove.
Step 12
Arrow
Minimum
190 degrees
Maximum
210 degrees
E2
F
A
K
Sur
face
without
HIDDEN
CAMS
M
BLACK 9/16" LARGE HEAD SCREW
(8 used in this step)
1S
Page 15
The groove
is closer to
this edge.
27G
(4 used)
