Step
Step 8
å
1
st
-Carefully stand your unit upright against the wall in its fi nal location. Strike a mark through the center of the hole in
the UPPER FRAMES (H). Lay your unit down.
å
2
nd
-Drill a 5/16" hole on the marks.
å
3
rd
-While you squeeze the wings together, gently tap two WALL ANCHORS (7) into the holes until they are even with
the surface of the wall.
å
Stand your unit upright placing the brackets in the UPPER FRAMES (H) over the WALL ANCHORS (7).
å
Turn two 2" PAN HEAD SCREWS (16) through the holes in the UPPER FRAMES (H) and into the WALL ANCHORS. (7).
å
NOTE: You will need to turn the 2" PAN HEAD SCREWS (16) multiple turns to completely tighten and secure your unit
to the wall.
Page 14
H
H
1
st
7
Mark and drill a
5/16" hole into
the wall.
Mark and drill a
5/16" hole into
the wall.
2
nd
2" PAN HEAD SCREW
(2 used in this step)
16
