Step 28
BLACK 7/8" LARGE HEAD SCREW
(2 used in this step)
17S
With the palm of
your hand, tap the
DRAWER BOTTOM
down into the groove.
The tabs should insert freely
into the slots. Gently tilt the
DRAWER SIDES side to side
until the tabs slip into the slots.
Groove
30S
Start each screw a few turns before
completely tightening any of them.
BLACK 1-9/16" FLAT HEAD SCREW
(4 used in this step)
Be sure the DRAWER
BOTTOM inserts into the
DRAWER FRONT groove.
CC
D20
D20
D20
D21
D21
D21
Y
Y
D74
Unfi
nished
sur
face
Be sure the
DRAWER
BOTTOM
inserts into
the DRAWER
BACK groove.
D716
D716
1
3
2
4
å
Fasten the SMALL DRAWER BOX FRONT (Y) to the
SMALL DRAWER FRONT (CC). Use two BLACK 7/8"
LARGE HEAD SCREWS (17S).
å
Insert the SMALL DRAWER SIDES (D20 and D21)
at an angle into the slot at each end of the SMALL
DRAWER BOX FRONT (Y).
å
Slide the DRAWER BOTTOM (D716) into the grooves
in the DRAWER SIDES (D20 and D21) and SMALL
DRAWER BOX FRONT (Y).
å
Fasten the DRAWER BACK (D74) to the DRAWER
SIDES (D20 and D21). Use four BLACK 1-9/16" FLAT
HEAD SCREWS (30S).
å
NOTE: Be sure the DRAWER BOTTOM (D716) inserts into
the groove of the DRAWER BACK (D74).
Page 33
Y
