å
Carefully turn your unit over onto its front edges. Place the
BACKS (I) over the ENDS and UPRIGHTS.
å
Make equal margins along the sides of the BACKS (I).
Push on opposite corners of your unit if needed to make
it "square".
å
Fasten the BACKS (I) to your unit using the NAILS (1N).
å
NOTE: Be sure to tap NAILS into the holes that line up
over the BOTTOMS (F and G).
å
NOTE: Perforations have been provided for access
through the BACK. Carefully cut out the rectangle in the
BACK for proper ventilation of your CPU.
Step 14
Page 19
Finished
sur
face
Finished
sur
face
NAIL
(30 used in this step)
1N
G
F
I
I
These holes must line up
over the RIGHT BOTTOM (F).
These holes must line up
over the LEFT BOTTOM (G).
Do not stand the unit upright without the
BACK fastened. The unit may collapse.
Caution
