___________________________________
햸
BATTERIES
:
The Tek-Point operates on 2 AA alkaline, lithium or nickel-
metal hydride batteries (not included).You can also use high
quality rechargeable batteries. Expect approximately 25
hours of operation from alkaline batteries.
Do not use “Zinc-carbon” or “Heavy-duty” batteries.
To replace batteries:
1. Use a coin or flathead screwdriver.
2. Rotate counterclockwise to remove cap.
3. Install 2 AA batteries, positive-side down.
4. Rotate clockwise until snug to close and seal.
The battery compartment was designed to provide a snug fit
for the batteries. If you experience difficulties in removing
your batteries, tap the pinpointer against the palm of your
opposite hand to help dislodge the batteries.
Low-Battery Warning:
If your batteries are running low and need to be replaced,
you will hear a
boop-boop-boop
sound at power-down.
Critical Low-Battery:
If the batteries are totally spent, you’ll hear a
boooooop
sound and the pinpointer will then turn itself off.
