background image

123-1018-001 

14 

TEKNATOOL WARRANTY  

 

Teknatool 5 Year Limited Warranty 

This Teknatool product is backed by a warranty from the date of purchase. Teknatool International Ltd will repair or replace, at its expense and 
option, this Teknatool product which in normal use has proven to be defective in workmanship or material, provided that the customer returns 
the product prepaid to an authorized Teknatool service center with proof of purchase of the product within TWO YEARS and provides Teknatool 
with reasonable opportunity to verify the alleged defect by inspection. Teknatool will pay return product by most cost-effective surface 
transport to customer. Any special freight services above this will be at customer cost.   Furthermore, Teknatool International Ltd. extends this 
two-year period for three additional years, excluding labor costs and electrical parts, provided the aforementioned conditions are met. 
Teknatool will not be responsible for any asserted defect, which has resulted from normal wear, misuse, abuse, power surges or excess voltage 
fluctuation, repair or alteration made by anyone other than an authorized service facility or representative. Under no circumstances will 
Teknatool International Ltd. be liable for incidental, special, indirect, and consequential damages or expenses, including loss of profits or loss of 
operations.  This warranty is Teknatool International Ltd sole warranty.  There are no other warranties, whether written or verbal, whether 
expressed or implied by law, trade, custom, or otherwise, whether of merchantability, fitness for purpose, or otherwise, except for remedies 
available to customers under the Consumer Guarantees Act or other legislation. 

OVERSEAS CUSTOMERS: Our Teknatool Distributors and agents will issue their own warranty to cover this product.  Terms may vary from those 
stated above; please check with your dealer. In North America warranty covers Continental USA only. For Alaska, Hawaii and other areas, warranty 
covers replacement of parts only and excludes transport costs

 

 

 

 

 

Register your warranty faster with Teknatool online. 

Visit our website on 

www.teknatool.com

 to register your warranty today! 

 
 

 

 

 

Summary of Contents for NOVA Voyager

















Reviews: