118-1214-010 8
23.
CHECK DAMAGED PARTS.
Before further use of the tool, any part that is
damaged should be carefully checked to ensure that it will operate properly
and perform its intended function. Check for alignment of moving parts,
binding of moving parts, mounting, and any other conditions that may affect its
operation. Any damaged part should be properly repaired or replaced.
24.
DRUGS, ALCOHOL OR MEDICATION.
Do not operate machine while under
the influence of drugs, alcohol, or any medication.
25.
DUST
WARNING.
The dust generated by certain woods and wood products
can be harmful to your health. Always use an approved dust mask and
operate machinery in well-ventilated areas. In addition, provide a means for
proper dust removal. Use wood dust collection systems whenever possible.
ADDITIONAL SAFETY RULES:
Warning!
Failure to follow these rules may result in serious personal injury
.
1.
AVOID EXCESS SAWDUST OR METAL FILINGS.
2.
KEEP WORK AREA CLEAN.
Do not turn
the NOVA Comet II Midi Lathe “ON”
before clearing it of all objects (tools, scraps of wood, etc.). Keep the nearby area
and floor clear of debris.
3.
CHECK SET-UP
WITH THE SPINDLE “OFF”
. Inspect the
set-up carefully and
rotate the
work piece, by hand, to check clearance(s). In addition, check to see
speed is correctly selected before turning “ON” spindle.
4.
WHEN NOT IN USE, SECURE THE ELECTRICAL POWER CORD BY REMOVING
IT FROM THE WALL OUTLET
to prevent unauthorized use of the NOVA Comet II
Midi Lathe and the chosen NOVA VERSATURN™ Accessory Attachment. Doing so
will prevent children or unauthorized personnel from accidentally turning it “ON.”
5.
TURN THE “ON/OFF” SWITCH ON THE LATHE TO THE “OFF” POSITION
AND REMOVE THE CHOSEN NOVA VERSATURN™ ACCESSORY
ATTACHMENT FROM THE NOVA COMET II MIDI LATHE
when the operations are
finished. Thoroughly clean the area surrounding the NOVA VERSATURN™ Accessory
making it ready for the next use.
6.
ALWAYS VERIFY THE CORRECT SPEED IS SELECTED BEFORE SWITCHING
