3 of 4
© 2007
D 062 - 05/07
VIEW MENU
When in the view menu, press either the Up or Down button to adjust the desired room
temperature. The temperature being adjusted depends on whether the control is in the
Occupied or UnOccupied mode. Refer to the control’s Data Brochure for available items.
ADJUST MENU
Use the Menu button to select the Adjust menu. In the Adjust menu, use the Item button to
select the item to adjust, then use either the Up or Down buttons to adjust it. Refer to the
control’s Data Brochure for available items.
TEMPERATURE UNITS
The RTU is capable of displaying the temperature in either °F or °C. In order to select the
temperature units, press the Menu button until the Miscellaneous (Misc) menu is displayed.
Then, while the UNITS item is displayed, use the Up or Down button to select the desired
units of measure.
ACCESS LEVELS
The RTU has four access levels that restrict the number of Menus, Items, and Adjustments
that can be accessed by the user. The four access levels are Limited (LTD), User (USER),
Installer (INST), and Advanced (ADV).
The access level of the RTU is found in the Miscellaneous (Misc) menu. The access level
can only be viewed and / or adjusted when the Lock / Unlock DIP switch of the control that
the RTU is connected to is set to the Unlock position. To determine if the RTU’s access
level is currently locked or unlocked, a small segment representing a padlock is viewed in
the bottom right hand corner of the display.
LIMITING THE TEMPERATURE RANGE
The adjustment range of the desired room temperature can be limited in order to avoid
extreme temperature settings. Set the desired room temperature in the Adjust menu. Then
go to the Miscellaneous (Misc) menu and select the LTD access level. If desired, set the
Lock / Unlock DIP switch on the control to the Lock position so that the access level can
no longer be adjusted.
As long as the RTU remains in the LTD access level the room temperature setting(s) can
only be adjusted ± 3°F (± 1°C) from the setting that was selected when the RTU was
placed into the LTD access level.
Settings
STEP FOUR
INSTALLING THE FRONT COVER
Align the hinges on the bottom of the front cover with the bottom of the RTU mounting base.
Pivot the front cover around the bottom hinges and push the top against the mounting base
until it snaps firmly in place.