12
5.6 Channel Buttons(
▼,▲)
Channel Buttons(▼,▲) have 3 functions as shown in following.
①
Channel buttons(▼,▲) are to change channels.
②
Channel buttons(▼,▲) are to select menu at menu mode.
③
Channel buttons(▼,▲) are to change transmission power. By pressing Up button(▲) while
PTT button is being pressed, the user can select
”
H
”
(High Power), or by pressing Down
button(▼), the user can select
”
L
”
(Low Power).
5.7 Accessory Connector
The Accessory Connector is used when using an external speaker microphone or doing PC
programming or making the Cloning or using as a Repeater.
5.8 RX /TX Led
This LED is a lamp indicating the current status of the Radio and please refer to the below contents.
①
RX : Red Lamp
②
TX : Green Lamp
③
CTCSS, DCS Error : Green Blinks.
④
Low Battery: Red Blinks With
“
beep
”
sound.
5. Charging the Battery
5.1 Safety Notes
1) The radio of XV/XU series receives power from high-performance Li-ion battery
(XSB-1800).
XSB-2400 Battery is safe of high performance and highly reliable, and could be
charged very fast. XSB-2400 Battery has been designed suitably only for the charger of Tekk
(WLB-100).
The charging of the enclosed Radio on the other maker
’
s charger will
cause a damage on the battery and also, will cause a trouble on the
Radio.
2) Please charge the battery before using the radio for best performance and safety.
3) When you charge the battery that is installed in the Radio, please turn off the radio first to charge
the battery.
