21
SWITCHING THE APPLIANCE OFF
The appliance can be switched off at
any time by pressing the general on/off
button
. In stand-by mode, an
H
will
appear on the hot surfaces. The dis-
plays for the rest of the hot plates will
not light up.
Double and Triple Burner
Hot Plates
With double and triple burner hot pla-
tes you can use the inside ring, or the
inside and the outside rings, depen-
ding on the size of the pan.
CONNECTING/SWITCHING DOU-
BLE AND TRIPLE BURNER HOT
PLATES ON
1
The hot plate must be selected and
the decimal point (12) lit up.
2
Select the desired power (from 1 to
9) using the touch button
or
(5/4).
3
Press the double or triple burner hot
plate button
(6) to switch the
second burner on. When the light
switches on (10), it is working.
4
In triple burner models, if once the
second burner is switched on you
want to activate the third burner,
you need to press the touch button
(6) again. The second light (10)
will then switch on.
DISCONNECTING/SWITCHING THE
DOUBLE BURNER HOT PLATE OFF
1
The hot plate that you want to dis-
connect must first be selected. Its
decimal point (12) must be lit up.
2
Press the double or triple burner hot
plate button
(6). The light will
switch off (10) and the outer ring will
be disconnected.
DISCONNECTING / SWITCHING
THE TRIPLE BURNER HOT PLATE
OFF
1
Press the touch button
(6). The
first light will switch off (10) and the
third ring will be disconnected.
2
If you press the button
(6)
again, the second light will switch
off (10) and the second ring will be
disconnected. Only the first burner
will be activated.
STOP function
This function allows you to pause the
cooking process. If the timer function is
activated, it will also go into pause
mode.
Activating the Stop function
1
The pans are on the cooking surfa-
ces, which are on at a specific level.
2
Press the Stop touch button
(9).
The power displays (3) will display
the letter S-T-O-P successively ins-
tead of the selected cooking levels.
The function will be paused.
Deactivating the Stop function
1
Press the Stop touch button
(9)
and then any other, except the
on/off button
(1). The cooking
process will resume with the same
power levels and set as previously.
You must press the second touch but-
ton within 10 seconds or the function
will be deactivated. The appliance will
switch off if the cooking process is not
resumed after a ten minute pause.
Function to keep a pan hot
(according to model)
You can use this function to keep food
hot in a pan on the cooking surface.
1
There is a pan on one of the hot pla-
tes with a previously set cooking
level.
2
Press the touch button
(4) and
keep it pressed down until the coo-
king level lowers to
. This is an
intermediate level between
0
and
1
.
To disconnect this function, just press
the minus button
(4) until it reaches
0
. This function will only work for a
maximum of 120 minutes, after which
the appliance will switch off.
Safety switch off function
If due to an error one or several hot pla-
tes do not switch off, the appliance will
be automatically disconnected after a
set amount of time (see table 1).
When the “safety switch off” function
has been activated, a
0
is displayed if
the glass surface temperature is not
dangerous for the user or an
H
if there
is risk of burning.
To reconnect the appliance, switch it
off by pressing the on/off button
(1)
and then on again.
Automatic cook start
This function makes cooking easier
because you do not have to be present.
The touch control pre-programmes the
chosen hot plate at the maximum
power and lowers it to the desired
power (which you have selected) after a
given amount of time (see table 2).
SWITCHING
THE
AUTOMATIC
COOK START FUNCTION ON
1
The hot plate must be selected. Its
decimal point (12) must be lit up.
2
Select power
9
and then press the
touch button
. The power display
will flash
9
and
A
alternately. Use the
touch button
to decrease to the
desired cooking power (for example
6). The display will flash
6
and
A
alternately.
Example:
You want to cook at power level
6
and
program a quick heat at the beginning.
GB
1 and 2
3 and 4
5
6, 7, 8 and 9
6
5
4
1,5
Maximum operating
time (in hours)
Table 1
Selected
power
1
2
3
4
5
6
7
8
9
1
3
4,8
6,5
8,5
2,5
3,5
4,5
—-
Selected
power
Table 2
Automatic Cook Start
Function (Time in minu-
tes)
Summary of Contents for TR 841
