background image

13

Instruction Manual

9. Troubleshooting

Warning!

  Only authorised technicians can carry out repairs.

Before contacting our customer service team, please refer to the table below to see if your 
fault can be fixed by yourself. Should a service technician visit be arranged and its found 
there are no faults with the appliance, a call out charge will apply.

Problem

Solution

Display isn’t turning on.

—  Check that the mains plug is inserted and switched on 

at the power point.

—  Check that a programme is selected on the programme 

selection dial.

— Check that the relevant fuse hasn’t blown.

 indicator is flashing

—  Empty the water container as per the steps in 8.3 within 

this user manual.

 indicator is flashing

— Clean lint filter.

Dryer doesn’t start

— Check the start button has selected.
— Check the appliance door has closed.
— Check that the programme has been set.

Water is running out of the 
dryer

— Align dryer horizontally.
— Clear air condenser and door seals.

Door is opening by itself

—  Press the door door closed until it “clicks” into position.
—  Ensure that the dryer hasn’t been overloaded with 

clothes.

Degree of dryness was not 
reached or drying time too 
long.

—  Clean the lint filter and wash the condenser.
— Empty the water container.
— Clean the moisture sensors.
—  Try using a higher drying programme next time.

Note:

If the above steps don’t resolve your issue or you cannot resolve the fault by yourself:
 

— Press the “On/Off” button, 

 

— Switch off the appliance at the power outlet and remove the plug,

 

— Call our customer service team. 

10. Technical Data

Power supply

220-240V ~50Hz

Rated Power

650W

Refrigerant

R134a

Ambient temperature

+5°C - + 35°C

Dimensions

595 x 622 x 845 mm

Rated drying capacity

7.0kg

Net Weight

52kg

Note:

—  Contains fluorinated greenhouse gases covered by the Kyoto Protocol. Hermetically 

sealed.

—  The rated capacity is the maximum capacity of dry clothes. Refer to the Programme table 

for maximum loadings specific to each programme.

—   Do not install the dryer in a room where there is a risk of a frost occurring. At 

temperatures around freezing point, the dryer may not be able to operate properly.

—  There is a risk of damage if the condensed water is allowed to freeze in the pump, or 

water container.

Troubleshooting

Summary of Contents for THPD70

















Reviews: