Teka RVI 20041 GBK, User Manual

Page: 30 / 76

INSTALLATION INSTRUCTIONS

Before Using Your Wine Cooler

Remove the exterior and interior packing.

Before connecting the Wine cooler to the power source, let it stand upright for approximately 2
hours. This will reduce the possibility of a malfunction in the cooling system from handling
during transportation.

Clean the interior surface with lukewarm water using a soft cloth.

When disposing your appliance, please choose an authorized disposal site.

Installation of Your Wine Cooler

This appliance is designed to be for in column (fully recessed) (Refer to sticker location the
back of this appliance).

This appliance is intended to be used exclusively for the storage of wine.

Place your Wine cooler on a floor that is strong enough to support it when it is fully loaded.

This appliance is using flammability refrigerant. So never damage the cooling pipe work during
the transportation. Locate the Wine cooler away from direct sunlight and sources of heat (stove,
heater, radiator, etc.). Direct sunlight may affect the acrylic coating and heat sources may
increase electrical consumption. Extreme cold ambient temperatures may also cause the unit
not to perform properly.

Avoid locating the unit in moist areas.

Plug the Wine cooler into an exclusive, properly installed-grounded wall outlet. Do not under
any circumstances cut or remove the third (ground) prong from the power cord. Any questions
concerning power and/or grounding should be directed toward a certified electrician or an
authorized Products service center.

Attention

Store wine in sealed bottles;

Do not overload the wine cooler;

Do not open the door unless necessary;

Do not cover shelves with aluminum foil or any other shelf material which may prevent air
circulation;

Should the Wine cooler be stored without use for long periods it is suggested, after a careful
cleaning, to leave the door ajar to allow air to circulate inside the wine cooler in order to avoid
possible formations of condensation, mold or odors.

Ambient Room Temperature Limits
This appliance is designed to operate in ambient temperatures specified by its temperature class marked
on the rating plate.
Class Symbol Ambient Temperatures range(
℃
)
Extended Temperate
SN
﹢
10 to
﹢
32
Temperate
N
﹢
16 to
﹢
32
Subtropical
ST
﹢
16 to
﹢
38
Tropical
T
﹢
16 to
﹢
43
Replaceable (LED only) light source by a professional
This product contains a light source of energy efficiency class G.
28