Teka RMF 77810 GBK, User Manual

Page: 13 / 146

2.2 ENERGY SAVING TIPS
•
The appliance should be located in
the coolest area of the room, away
from heat producing appliances or
heating ducts, and out of the direct
sunlight.
•
Let hot foods cool down to room
temperature before placing it in the
appliance. Overloading the
appliance forces the compressor to
run longer. Foods that freezes too
slowly may lose quality, or spoil.
•
Be sure to wrap foods properly, and
wipe containers dry before placing
them in the appliance. This cuts
down on frost build-up inside the
appliance.
•
Appliance storage bins should not
be lined with tin foil, wax paper, or
paper toweling. Liners interfere with
cold air circulation, making the
appliance less efficient.
•
Organize and label food to reduce
door openings and extended
searches. Remove as many items
as needed at one time, and close
the door as soon as possible
2.3 CHANGING THE
LIGHT
•
Any replacement or maintenance of
the LED lamps is intended to be
made by the manufacturer, its
service agent or similar qualified
person.
•
Light source in this product is
replaceable only by qualified
engineers.
1. Please take out the plug before
removal.
2. Remove the lampshade with a
screwdriver.
3. Take down the lamp panel.
4. Remove the connection
terminal.
2.4 START TO USE
•
Before initial start, keep the
refrigerator still for two hours before
connecting it to power supply.
•
Before placing any fresh or frozen
foods, the refrigerator should have
run for 2 - 3 hours, or for above 4
hours in summer when the ambient
temperature is high.
NOTE
This product is not recommended for use
with sockets or main switch with the A/
GFCI function, otherwise it may cause
false tripping.
1.
it’s not pose a safety risk when
tripped.
2. If tripping persists, it is recommended to
replace the sockets or main switch
without A/GFCI function.
EN-12