Teka IR PRO 3200, Installation Instructions And Recommendations For Using And Maintaining

Page: 26 / 112

EN
26
CHEF sensor (9). These functions
are available depending on the model.
To activate a special feature on a zone:
1 First it should be selected; and then,
the decimal point (4) will be active
on the power indicator (3).
2 Now click on the CHEF sensor
(9). The sequentially successive
presses will go over all the CHEF
functions available in each zone
one by one. These functions
will show the activation with the
corresponding leds (14), (15), (16)
and (17).
If you want to cancel a special active
function at any time, you should touch
the “slider” cursor sensor (2)in the
position ''0''.
KEEP WARM FUNCTION
This function automatically sets an
appropriate power level to keep the
cooked food hot.
To activate it, select the plate, and
press on the CHEF sensor
(9)
until the led (16) located on the icon
lights up. Once the function is
activated, the symbol will appear
on the power indicator (3).
You can override the function at
any time by turning off the plate,
by changing the power level or by
choosing a different special function.
MELTING FUNCTION
This function maintains a low
temperature in the cooking zone.
Ideal for defrosting food or for slowly
melting other food types as chocolate,
butter, etc.
To activate it, select the plate, and
press on the CHEF sensor
(9)
until the led (15) located on the icon
lights up. Once the function is
activated, the symbol will appear
on the power indicator (3).
You can override the function at
any time by turning off the plate,
by changing the power level or by
choosing a different special function.
SIMMERING FUNCTION
This function allows you to keep
simmered.
After the food is boiled, enable the
plate by selecting it, and press the
CHEF sensor (9) until the led (14)
located on the icon lights up.
Once the function is activated, the
symbol will appear on the power
indicator (3).
You can override the function at
any time by turning off the plate,
by changing the power level or by
choosing a different special function.
SLIDE COOKING FUNCTION
(depending on the model)
This function allows to divide the
flexible zone into three areas (see
fig.2) and activates a predefined
power configuration. It will allow slide
the vessel from one area to another,
to cook with the power assigned to
each zone.
To activate it, you must first activate
the "Flex Zone" function (see section
"Flex Zone function").
After, press on the CHEF sensor
(9) , until the leds (17) located on
the icon lights up. When doing so, the
power indicators (3) will show three
segments (see fig. 3) indicating that
you can now place the vessel.
Once the vessel is placed, the power
level will appear automatically in the
power indicators (3): for zone #1, the
power level is 3, for zone #2 the power
level is 5 and for zone #3 the power
level is 9 (see fig.2 and 4).
To deactivate this function, you must
touch the "slider" cursor (2) in the
position “0”.
Fig. 2
Flex Zone function
(depending on the model)
Through this function, it is possible
to enable the cooking zones work
together, and to select a power level
and to activate the timer function for
both zones.
To activate this function, press the
sensor (7). By doing so, the decimal
points (4) of the linked plates will
light up and the value “0” will be
shown on their power indicators (3).
The clock timer indicator (12) will
show three segments indicating the
activated zones. You will have a few
seconds to perform the next operation;
otherwise, the function will be disabled
automatically.(see fig 5).
After the “Flex Zone” is selected, you
can assign the power by touching
Fig. 5