Teka DW7 56 FI, Instruction Manual, Page: 23 / 31

Tension adjustment
of the door spring
【 】
Figure5
Tension adjustment of the door spring ●
Connection of drain hoses
●
The door springs are set at the factory to the proper tension for the outer door. If aesthetic
wooden panel are installed, you will have to adjust the door spring tension. Rotate
the adjusting screw to drive the adjustor to strain or relax the steel cable(see figure 5).
Door spring tension is correct when
t he door remains horizontal in the
f ully o pened position
yet rises
t o a close with the slight lift of a
f inger.
，
rel ax
Insert the drain hose into a drain pipe with a minimum diameter of 4cm, or let it
run into the sink, making sure to avoid bending or crimping it. Use the spe ial
plastic support that comes with the appliance (figure 6). The free and of the hose
must be at a height between 400 and 1000mm and must not be immersed in water
to avoid the back flow of it.
: The special plastic hose support must be
solidly fastened to the wall to prevent the drain hose from moving and allowing water
to spill outside the drain.
c
Drain pipe connection
【 】
Figure6
PLEASE H ANG UP THE DR AI N HOSE EIT HER WAY OF A, B, C
φ
40mm
A
B
C
Counter
Front
Drain pipe
Drain hose hook Close the drain hose hook to the counter