Instructions for use
You can activate or deactivate the cooker
hood by operating the functions shown in the
diagram.
Switch on the extractor fan a few minutes
before (3-5 minutes) you start to cook in order
to ensure that a steady air flow has been
established before fumes appear.
Allow the extractor fan to run for several
minutes after you have finished cooking in
order to expel all the grease from the outlet
duct. This prevents the return of grease,
smoke and smells.
Display
Timer
Decrease selected funtion
Increase selected funtion
Light
Program the working time
1)Switch on the cooker hood and choose the
required aspiration speed.
2)Push ‘Timer’.
3)Select the required programming time from
1 to 99 minutes by using the buttons ‘+’ and
‘-’.
4)The display will alternately show the clock
and the remaining programming time.
The maximum speed ‘H’ can only be selected
manually and will be changed automatically
to the second speed level after approximately
10 minutes.
Cleaning and maintenance
During cleaning and maintenance
work, make sure the safety instruc-
tions are complied with.
Cleaning the hood body
•If your kitchen hood is made of stainless
steel, use proprietary cleaners mentioned in
the product instructions.
•If your kitchen hood is painted, use lukewarm
water and a neutral soap.
•Never use metallic scourers, nor abrasive or
corrosive products.
•Dry the kitchen hood using a cloth that does
not produce fibres.
•Do not use vapour cleaners.
Lights
For changing the light bulbs please contact the
manufacturer’s nearest Technical Service.
Cleaning the metal filters
•To remove the filters from their fittings, press
lightly on the locks and then pull them off.
•The metal filters can be cleaned by soaking
them in hot water with neutral detergent until
the fat dissolves and then rinsing them under
the tap or using special anti-grease products.
They can also be washed in a dishwasher.
In this case, it is advisable to stack them
vertically to avoid food residues to stick to
them.
•Cleaning in a dishwasher may damage the
metallic surface (blackening it), although this
will not affect its fat retention capacity.
•Once clean, leave them to dry off and then fit
them onto the kitchen hood.
GB
