11
EN
G
Index
Page
Description of the appliance
11
Instructions for use
11
Cleaning and maintenance
12
Problem solving
12
Sizes and specifications
12
Accessories supplied
13
Installation
13
Active charcoal filters
13
A
Electronic programmer control box
with buttons to control speed, light and
power in use indicators DISPLAY.
B
Metal filters.
C
Lamps - 20 W (G-4).
D, E
Vertically adjustable tubecovers.
F
Decorative part.
Switch on the extractor fan a few minutes before
you start to cook in order to ensure that a steady air
flow has been established before fumes appear.
Allow the extractor fan to run for several minutes
after you have finished cooking (between 3 to 5
minutes) in order to expel all the grease from the
outlet duct. This prevents the return of grease,
smoke and smells.
The cooker hood will work automatically in the first
3 speeds according to the humidity level detected,
and will turn off automatically when humidity stops.
In order to take off the automatic mode, manually
select a speed or turn off the cooker hood.
The automatic mode will restore again when the
cooker hood does not work and no humidity is
detected.
To cancel the Automatic Mode, press “Timer”
during at least 5s., when the cooker hood is in off
position. The Program Display shows “-”.
To return to the Automatic Mode, repeat the
process.
Proceed as follows:
1) Turn the kitchen hood on and choose the
required speed.
2) Press "timer". The "Program DISPLAY" will
flash.
3) Select the required time by pressing the
increase and decrease speed selectors. There
is a variation of 5 in 5 minutes. (Min.= 5min.;
Max.= 45min.).
4) Once the required time has been selected, press
"timer" again to memorise the program.
5) The kitchen hood will turn itself off once the
programed time has finished.
Description of the appliance
Instructions for use
You may control the kitchen hood by operating the
controls as shown in the diagram.
-
-
Programming timer
Automatic functioning mode "A"