Tek-Trol Tek-LCD 7802A, Instruction Manual, Page: 27 / 43

4.4.11 Setting the Tag Display ( TAG )
The meter can be set to display a combination of seven alphanumeric characters for engineering
units (e.g. GALLONS) or for identification (e.g. TANK 3). Press Right arrow to select next unit and Up
arrow to increment unit.
•
To automatically cycle the lower display between total reading for ten seconds and tag for two
seconds, choose tOGlE.
•
To disable the tag display and show only total reading uninterrupted on the lower display,
choose Off.
•
To show tag only on the lower display choose On. Totalizing continues in the background but is
not shown while On is selected.
Selecting On or tOGlE prompts for entry of the tag.
The unit being changed blinks.
Press the
Enter button, at any time, to accept a setting or Menu button to exit without saving
changes.