Tek-Trol Tek-LCD 7802A, Instruction Manual, Page: 21 / 43

dec.pt
or
Select Total
Decimal Point
or
ToTAL
ddddd.dd
dd.ddd
4.4.4 Setting the Decimal Point ( dEc
_
PT )
Rate decimal point may be set with up to four decimal places or with no decimal point at all. Total
decimal point may be set with up to six decimal places or with no decimal point at all. Rate
decimal and total decimal are programmed individually.
Pressing the Right arrow moves the decimal point one place to the right until no decimal point
is displayed. Pressing the Up arrow moves the decimal point one place to the left.
Select Rate Decimal Point