Ohms Too High:
The resistance of the atomizer coil is too high for the current
wattage setting. If this happens, the Dna 40 will continue to fire, but will not be
able to provide the desired wattage. The
Ohms Too High
message will continue to
flash for a few seconds after the end of puff.
Ohms Too Low:
The resistance of the atomizer coil is too low for the current
wattage setting. If this happens, the Dna 40 will continue to fire, but will not be
able to provide the desired wattage. The
Ohms Too Low
message will continue to
flash for a few seconds after the end of puff.
Too Hot:
The Dna 40 has onboard temperature sensing. It will shut down and
display this message if the internal board temperature becomes excessive.
Auto power down:
The screen will be at full brightness while firing. After 10 seconds with no button
presses, the screen will dim. 30seconds after the last button press, the screen will
fade out and the device will go into sleep mode. To wake the device, press the
Fire
button.
